PDA

View Full Version : 9252 & ar7100


heliunder
10-26-2009, 05:41 AM
Hi all,
the 9252 servos have a tab on them stopping them from skidding
into the ar7100.is it ok to grind it down or do I need some kind of
adapter.
Cheers

capebob
10-26-2009, 07:08 AM
Grind them off, but be careful not to go too far. Also, be aware that Futaba does not recommend that the 9252 be subjected to 6 Volts. I ignored this warning and had early failures on several servos.

Bob

heliunder
10-26-2009, 07:09 PM
thanks mate