PDA

View Full Version : New Member and mx400pro newbie.... Radio setup help needed??


mx400pro1
08-31-2006, 11:19 AM
Hello,

Im a new member and have a few questions about my new heli. I just bought a mx400pro and would like to know if there are anything I need to know in helping me set-up my heli? I bought the Futaba 6EXH PCM with the S3103 servos and the GY401 gyro. What would be the best Lipo battery to use? Thanks for any help in advance :lol:

jrohland
08-31-2006, 01:22 PM
I assume you have the HeliMax motor and ESC. Most of us are using 3 cell 2100 MAH batteries. I use ThunderPower brand. A number of folks are using APEX and Align packs in the 2100 range as well.

A 2100 pack should get you about 10 minutes of standard flight. If you push hard 3D, maybe 7 to 8 minutes.

I am not familiar with the radio and servos you have but, they are probably fine. I use HS-65MG (http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=WR&I=LXLGJ5) servos and a Spektrumized JR radio. (I modified a JR XP6102 radio with the transmitter from a Spektrum DX6).

The Futaba GY401 is a very popular gyro for 400 sized helis.

Welcome, have fun and post some photos of your 400.

jrohland

mx400pro1
09-01-2006, 08:14 AM
Thanks, I will post some pics when it is done... :D :D :D

mx400pro1
09-01-2006, 02:19 PM
I have been looking for batteries and a charger. Is the Align RCC-3CX a good charger for me to start of with? Also I was looking at the Align 3s 2100 16c battery. Would this be a good combo? Thanks again... :noteworthy

Raven_darkcloud
09-01-2006, 03:18 PM
Yes, good wieght and will plug right into the charger

mx400pro1
09-02-2006, 07:39 PM
Today I ordered the Align RCC-3CX charger and a Align 3s 2100 16c battery from GrandRC. I hope this combo will work out alright?? Does anyone know about how long it will take to charge a battery using this charger?? Thanks again for everybodys help... :lol: :lol:

mx400pro1
09-07-2006, 07:55 AM
Well as you know Im new to this whole Heli Thing. :dontknow Does anyone have a reference chart that I could use for setting up my Futaba 6EXH PCM radio? I really don't have a clue on where to start. Thanks for any help I can get.... :glasses2:

mx400
09-08-2006, 02:59 AM
Do you have yahoo messenger? Im setting up the same heli and thought we might be able to help each other out. I got some good info from a couple friends on my radio set up, and i should be testing it all out next week sometime hopefully! Cya later all

Spectre
09-08-2006, 08:15 AM
I also need help with the 6exh

mx400
09-08-2006, 01:41 PM
Hey you all have a time where we can get on the website chat? im good 12:30 pm til 5:00 pm through the week. That would be nice for all of us setting up our stuff!

mx400pro1
09-08-2006, 08:37 PM
That would be great for me......I will try and hook up with you next week. Thanks

mx400
09-10-2006, 01:40 AM
Sounds good to me send me a pm sometime to let me know when.

mx400pro1
09-14-2006, 01:37 PM
mx400... Here is my email address mparent16@comcast.net send me an email and let me know how you are coming along with you heli. Thanks.. Im still working on finishing mine up.