clutch uniball

[Rada70]

Hi gents,
Does the uniball get glued into the clutch, or you just fit it in without? If it needs to be glued, what kind of glue to use. thanks

[DavidH]

I have never glued it. It is a press fit,

David

[wattybotts]

If you are using a Stratus, where the gap changes a bit in flight, I would recommend gluing it. Make sure to scratch the outside of the driver with a razor blade so that the glue has something to stick to. At MA, they use a high strength Aircraft Grade Epoxy.... since we cant get that, they recommend using JB Weld instead.

[Rada70]

Great. thanks guys.