View Full Version : Does anybody have an extra shim?
josh mcormick
11-24-2009, 07:13 PM
Hey guy just bought a used outrage, seems like I didnt receive the shim that sits right about the oneway, and rides on the inner race of the second bearing. size is 10x13x1. Seems like the only bird using this size. The only way I can purchase this shim is by buying a new ($20) one-way bearing, just for a 20 cent shim. Has anybody purchased an extra one-way bearing, and could part with a spair shim:roll:
DominicD
11-24-2009, 07:16 PM
Contact HD and see if you can buy or get the part by itself.
kazager
11-24-2009, 07:29 PM
If you have an issue getting one, PM me your address, and I'll drop one in the mail for you.
Capi, is the Velocity one the exact same? (I assume it is)
josh mcormick
11-24-2009, 08:31 PM
kazager is sending me spare shim in the mail. Cool. Thanks a lot guys.
I Would be happy to pay it forward. :hug:
DominicD
11-24-2009, 08:36 PM
In that case send me a spare set of Radix 600mm :)
josh mcormick
11-24-2009, 08:44 PM
Ahh.....how about a spare cx blade :lol:
DominicD
11-24-2009, 08:45 PM
My club is so scattered with broken parts i am sure i can find what ya need.
josh mcormick
11-24-2009, 08:52 PM
My club is so scattered with broken parts i am sure i can find what ya need.
Capi I think you might of misunderstood me. I was saying I can't send your radix blades ya need, but could send ya some cx blades:YeaBaby: Just tape about 10 blades together till ya get 600mm. Ya might need that 100mph tape:cheers
DominicD
11-24-2009, 08:53 PM
I never listen when ppl talk to me, i just hear what i want :)
s0laris
11-25-2009, 05:25 PM
I didnt have one either. Mikado makes one that you can buy 2 to a pack.
aliboy
11-30-2009, 05:36 AM
Mikado makes one that you can buy 2 to a pack.
Could you give me the part # for these please, couldn't find any suitable when I looked before. I found 10x16x1 but I think these might be too big?
Thanks, Al
s0laris
12-03-2009, 09:43 AM
Sorry for the late reply
http://www.readyheli.com/MIK0841_Mian_Blade_Grip_Thrust_Bearing_Spacer_p/mik0841.htm
it is 10x14x1 it does not touch the inner race so it works fine.
josh mcormick
12-03-2009, 11:00 AM
Sorry for the late reply
http://www.readyheli.com/MIK0841_Mian_Blade_Grip_Thrust_Bearing_Spacer_p/mik0841.htm
it is 10x14x1 it does not touch the inner race so it works fine.
Dont you want it to touch the inner race, and only the inner race?
josh mcormick
12-03-2009, 11:03 AM
Kazager, Thanks, your shim came in yesterday, much appreitiated :hug:
s0laris
12-03-2009, 04:24 PM
Er ya. Doesn't touch outer I mean
DominicD
12-03-2009, 08:51 PM
No excuse, DEATH !
aliboy
12-04-2009, 08:10 AM
No excuse, DEATH !
I move to pardon S0laris for the fine link, thanks!
josh mcormick
12-04-2009, 08:18 AM
No excuse, DEATH !
Will let it slide this, just make sure it dosent happen again:rolling