Condensation on JR X9303 2.4G Tx

[brentonasmith]

Hoping someone can advise the best course of action

only in the last week, a small amount of condensation has appeared on the inside of the display on my treasured 9303 :confused:

by the time I return home where the conditions are more moderate it's disappeared.

the weather conditions have been slightly humid 50-60% but not overly warm but it only appears outside when flying

the Tx is always stored in it's case inside our house when I am not flying

any suggestions?:shock:

[Russers]

I have always put one or two silica gel packs inside my TX.
just find an empty space inside close to the top of the top inside.
take it out often and dry it out with your girlfrends hair dryer....
Just don't get nailed with her hair dryer in your hands!!!!
I also keep some of those packs in my heli cases.
Hope this helps

[HeathH]

mine has been doing this off and on since i got it ( around 1year). I have had no issues. I like the silica pack idea. I will try that :thumbup:

[Pinecone]

Open the case at home to allow the moisture to evaporate.

Obviously there is moisture inside, when outside, where it is clder, it will condense.

Silca gel packs are also good, but you need to replace them on a regular basis. With new stuff, they are sealed in a plastic bag, so a little gel keeps it pretty dry.

[ddracer]

That happens quite a bit over here.(UK) If you dont leave the tranny in direct sunlight it seems to help. I must admit im going to try the silica gell though.