Setting Collective Pitch on EVO 30

[Rockohaulic]

I think I have too much pitch on my EVO 30. I set it at +11, -11 deg.

I'm going to set it to +/- 10 deg.

Should I use the pitch curve to do this (currently 0, 25, 50, 75, 100), or limit the pitch with the TX End Points for Collective???

Thanks!

Rockohaulic

[BarracudaHockey]

Pitch curve. What engine are you running? You might want to go +- 9 with the 32

9.5 or 10 for the 37 or toki 40

Leave your throttle hold top point at 100 percent, you can always use that much for autos.

[Rockohaulic]

Thanks BarracudaHockey!

I'm running an OS37.

Cool, I never thought of that! So what you're saying is use my Pitch Curve to set +/- 10 for Normal and Idle 1, but set the Pitch at +/-11 for Autos. Using the End Points would limit the curve for all modes...

Hmm, when I select throttle hold, does the TX use a different pitch curve such as Idle 2 or idle 3 (without actually moving the idle up switch)???

Rockohaulic

[BarracudaHockey]

Depends on your transmitter, and you don't need -11 for an auto unless you are doing inverted autos or something, just at the top end where its important.

The 9C has a separate pitch curve for throttle hold, as I'm sure the 9303, many others do to.