RADIO GEAR

[wcc963]

Ok im looking into getting a logo 10 after flying my rex and starting to outgrow it. and was wondering what would be a good setup. servos, battery motor esc bec, gyro, and radio. and maybe anything else that im forgetting.

[MrMel]

My setup is as follows

Logo 10 3D
Motor: Tango 45-10
ESC: Jazz 80-6-18
Pinion: 19T, 17T for sport, 19T for hard 3D
Battery: Flightpower EVO 6s1p 3700 & Flightpower EVO 6s1p 4350 (newer)
Servos: Futaba 9650
Gyro: 611/9256

Radio, Do you have your T-Rex radio? If it supports 120 degree swash, you can use that for you logo as well.

[OICU812]

Another setup would be to substitute the Tango 45-10 for a NEU 1910-1Y with a 20 tooth, more tourque than the 45-10. Also you could look at using a Jazz 55-10-32 so that if later on you want to use it for a bigger system like a Logo 14 you can. Just more to think about it is all.