PDA

View Full Version : Thingy not lifting off the ground.


Pages : [1] 2 3 4 5 6

Wurger
12-30-2009, 10:49 PM
I have a thingy that contains doodads. The thingy's dealies will not get light on the ground when I go to full collective. What should I do / check ?

Dicey
12-30-2009, 10:51 PM
How many doodads does your heli have? Is the vroomy bit properly meshed with your whirly bit?

sethf8403
12-30-2009, 10:52 PM
i would adjust your dingle hoppers...they should be parallel to each other all the way up your doohicky...

Dicey
12-30-2009, 10:53 PM
but what if he has programmable dingle hoppers?

sethf8403
12-30-2009, 10:54 PM
programmable dingle hoppers are a joke, spares cost so much! what kinda controlly thing do you have?

DominicD
12-30-2009, 10:54 PM
Make sure you use the manly hole in the programmable dingle hoopers for maximum doodad performance.

Wurger
12-30-2009, 10:54 PM
Okay the whatchamacallit seems to be setup okay as my widget turns the correct direction. My dinglehoppers only have one hole so nothing to worry about there.

Dicey
12-30-2009, 10:55 PM
so what about the vroomy bit? have you checked if the airy bit is clear?

Wurger
12-30-2009, 10:59 PM
Im checking the vroomymajig and it seems okay.

nexgen
12-30-2009, 11:14 PM
maybe the whirly part doesn't have enough tippyness in it, so it isn't windy enough to the ground.

DVS
12-30-2009, 11:15 PM
Did you check your thingamajig ?

Kustom
12-30-2009, 11:29 PM
check the long thing with the threads on both ends or it oculd be the fluxcapastar. maybe you bernt the verbrator,

sethf8403
12-30-2009, 11:30 PM
i bent my verberator once, doesn't seem like it should cost so much!

outhouse
12-30-2009, 11:43 PM
I think your thingy bearings are a we bit notchy and the doodads are out of track.

plus that there radio thingamajiggy isnt corunjulated to the wire jobbber in back end of the whammer's whirly department

s0laris
12-30-2009, 11:50 PM
Noobsters!

Your ClamaFugs are interfering with the Doohickies. Simply Drill a hole in the watchamacallic and lengthen the doodads by 12mm.

Its a common mistake

Wurger
12-30-2009, 11:50 PM
Someone suggested using a flizzlewazzle lock to keep it from moving this way my diddlies can be setup to the correct pitch? But I also heard that the dinglehoppers have to be aligned correctly to begin with?

The barfletuber is dripping the correct amount when the vroomy is at full power.

Jason O'Connell
12-30-2009, 11:58 PM
Just check that it has at least 2 spinner arounder thingies.

Wurger
12-31-2009, 12:04 AM
I just drilled into my DS760 whatchamacallit and now my widget spins in circles!

Teej
12-31-2009, 12:05 AM
I have a thingy that contains doodads. The thingy's dealies will not get light on the ground when I go to full collective. What should I do / check ?

Sounds like the ****ing ****er is ****ing ****ed up.

****!

s0laris
12-31-2009, 12:05 AM
Oops my bad. I meant drilling part of the mooglerboogler to give some clearance

devious17
12-31-2009, 12:23 AM
Me thinks you needy more pitchyness on them blades or them head is needing more spinning or the two blended together.

Brett74
12-31-2009, 12:48 AM
Have you removed the lifty thingy holder for when you are manually moving the wherly with your hands?

Slyster
12-31-2009, 12:48 AM
I have a thingy that contains doodads. The thingy's dealies will not get light on the ground when I go to full collective. What should I do / check ?Try search you dork. Man.. making us do all the work.

Ring Leader
12-31-2009, 12:52 AM
Slyster has a dooda up his hicky :P

outhouse
12-31-2009, 12:56 AM
Slyster has a dooda up his hicky :P


LOL go get em