Anyone else have GOOD luck with the cheap FG blades?

[imq707s]

I used to only fly the Align 325 Pro Woody blades on my Blade 400, and now my CX 450.....but I picked up some of the really cheap FG blades from Hobby City just to try them out. For $5 a set, I'm actually surprised at how balanced they were, and how well they seem to fly. I don't really notice any difference from the Align Pro's I'm used to. I'm just sport flying, not hard 3D stuff.

Anyone else have really good luck with these cheap blades??

http://hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=8518&Product_Name=325mm_Fibreglass_Main_Blade_%281pair% 29

[iceman09]

I'VE used them blades there pretty good but i get the tig cf blades and hobby city cf blades and i think there great ive never had any problem and they only cost 15.00 to 20.oo bucks you cant beat that with a stick lol.

[mikyang]

friend we are fimaliar eith the price of the blade ,the price $5 for Glass fiber blades one pair ,it is not a best price ,i have ever got them in $4/pair ,and i enjoy the flight too .
good luck !

[HeliShez]

I have them on my 450. Ballance was spot on. No problems after a handfull of hovers.

[pidjones]

I just received a pair last week. They are ~ 0.6 gm out from each other. I haven't tried to balance or check CG yet. They will take a lot of tape!

[imq707s]

Well, I think my new favorite ones are the cheap CF blades from X-heli. I think they were around $11, and they are the only blades I have ever got that were perfectly balanced right out of the package.....I'm sure I just got lucky this one time :)

[ser123ser]

I use the cheapie FG blades from xheli on my 450's and my 500. they don't sell em any more for the 500.

i just got a set for my 500 from HK. they run great.

Looking to put them on my 600 now. 60 to 100 bucks for a set of CF blades is a bummer. Just got my 600 built and maiden lift off had a tip over and destroyed the brand new aligns CF. man, went down and had to buy a 80 set of new aligns because i could not wait for a shipment from china.

long live the cheapies, a lot of them that i have used probably are 2nds with a cosmetic blemish of some sort. every set has been perfectly balenced and have worked wonderfully.

[rcjames]

I used to only fly the Align 325 Pro Woody blades on my Blade 400, and now my CX 450.....but I picked up some of the really cheap FG blades from Hobby City just to try them out. For $5 a set, I'm actually surprised at how balanced they were, and how well they seem to fly. I don't really notice any difference from the Align Pro's I'm used to. I'm just sport flying, not hard 3D stuff.

Anyone else have really good luck with these cheap blades??

http://hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=8518&Product_Name=325mm_Fibreglass_Main_Blade_%281pair% 29

Hi, hobby king i baught their 3d blades but fibreglass ones and look like that one but it was for the hk 500gt which is longer blades i never had an issue it did was getting out of tracking but wasn't a huge problem. Really liked it. Fiberglass are nice, little heavier though but nice blades.

[rcjames]

I use the cheapie FG blades from xheli on my 450's and my 500. they don't sell em any more for the 500.

i just got a set for my 500 from HK. they run great.

Looking to put them on my 600 now. 60 to 100 bucks for a set of CF blades is a bummer. Just got my 600 built and maiden lift off had a tip over and destroyed the brand new aligns CF. man, went down and had to buy a 80 set of new aligns because i could not wait for a shipment from china.

long live the cheapies, a lot of them that i have used probably are 2nds with a cosmetic blemish of some sort. every set has been perfectly balenced and have worked wonderfully.

Get the mavrikk blades for like 49.99 their carbon fiber blades and i used it on my raptor 30 that i sold, i used the mavrikk blades all last year still look new too LOL. I might get those for my new 50 size or i might get those carbon fiber 3d blades.

[rcjames]

I use the cheapie FG blades from xheli on my 450's and my 500. they don't sell em any more for the 500.

i just got a set for my 500 from HK. they run great.

Looking to put them on my 600 now. 60 to 100 bucks for a set of CF blades is a bummer. Just got my 600 built and maiden lift off had a tip over and destroyed the brand new aligns CF. man, went down and had to buy a 80 set of new aligns because i could not wait for a shipment from china.

long live the cheapies, a lot of them that i have used probably are 2nds with a cosmetic blemish of some sort. every set has been perfectly balenced and have worked wonderfully.

http://www.heliproz.com/prodinfo.asp?number=802140 54.99

[RCMike15]

this is where i buy my T-500 blades free and fast shipping +1 http://highflyheli.com/index.php?main_page=product_info&cPath=16_18&products_id=434