Kody
02-01-2010, 05:09 PM
Have 2 CC Phoenix 35 amp ESC's with BEC' attached to them. Both were in 450's with low time. Sold both the 450's and do not need these any more...
Both have Deans plugs and 3.5mm mail bullet plugs on the motor ends. Each have an external BEC soldered in and double sided taped to the ESC. One has a jumper on it to adjust the voltage from 5 to 6 volts and the other one I hard wired it at 6 volts for safety.
Running an external BEC allows you to run a 4 cell pack and also allows your servos to run at 6V for better performance.
$45 each... That covers Pay Pal fees and shipping in the lower states.
Thanks for looking,
Kody
Both have Deans plugs and 3.5mm mail bullet plugs on the motor ends. Each have an external BEC soldered in and double sided taped to the ESC. One has a jumper on it to adjust the voltage from 5 to 6 volts and the other one I hard wired it at 6 volts for safety.
Running an external BEC allows you to run a 4 cell pack and also allows your servos to run at 6V for better performance.
$45 each... That covers Pay Pal fees and shipping in the lower states.
Thanks for looking,
Kody