02-02-2010, 05:23 PM
:arggg:I have a friend that has a t-maxx 3.3, he's got alot of aluminum upgrades on it and has a problem with the slipper clutch, he keeps tightening it up, but it keeps slipping, can anyone give me some ideas on how to fix this, thank you, rich.
03-03-2010, 06:35 PM
Try replacing the nut on the shaft. the nylon can get worn and let the nut back off on it's own. If that doesn't do it take the clutch apart and check the pad thickness and that nothing is cracked/broken in the pack. I think the service limit for the pads is 2mm. Any less or at 2mm means it needs to be rebuilt.