FBaity
09-26-2006, 10:37 AM
Do any of you guys have problems with the 10X battery door breaking and will no longer close? My third door has just broken and JR wants you to send the TX back to replace it. I have been told by some Senior heli flyers to just tape it closed and forget it???
Frank
eskiserkan
09-26-2006, 04:24 PM
I'm using 10X and never had this type of problem with my battery door .
FBaity
09-27-2006, 10:30 AM
I'm using 10X and never had this type of problem with my battery door .
Looks like I am not the only one with the Battery Door issue.
nadman
Status: New Heliman
Registered: Jun 2004
Location: san diego, ca A piece of (black) electrical tape will do the job also.
NEW 09-26-2006 01:25 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE Attn: RR
MR10X
Status: Elite Veteran
Registered: Jun 2003
Location: JAX,FLORIDA Clear works well too.
JRYSOSXLEVOMAN
NEW 09-26-2006 02:53 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE GALLERY Attn: RR
3D Heli Ireland
Status: Heliman
Registered: Jun 2006
Location: Ireland Just tape it up with black electrical tape. They all go the same way. Curtis has his Tx taped up as well so don't feel too bad about it.
www.3dheliireland.com Sponsored by CSM
NEW 09-26-2006 03:14 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE HOMEPAGE Attn: RR
reddragon
Status: Key Veteran
Registered: Aug 2003
Location: Brooklyn, N.Y. Damn this is sad for a transmitter that is so bloody expensive. If they didn't manufacture some of these parts so cheaply then they wouldn't break. Then again...I know why they do it. This is so you will keep running back to them for parts. It makes sense on their end. Good Luck.
W.G.-Fly it like you stole it!
NEW 09-26-2006 06:58 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE GALLERY Attn: RR
Trexflyr
Status: Heliman
Registered: Sep 2006
Location: Irvine, CA I feel your pain. I broke my JR TX plug, this damn thing doesn't come out and when it does it breaks in the process!! Better yet, they are bloody hard to find.
NEW 09-26-2006 07:02 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE Attn: RR
Furious Vigor
Status: Key Veteran
Registered: Feb 2004
Location: Kitchener, Ontario, Canada i baught mine used, it was taped when i got it, and still taped even now!
Where did it go!?!?!
NEW 09-26-2006 07:56 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE HOMEPAGE GALLERY Attn: RR
Isaac F
Status: Key Veteran
Registered: Sep 2001
Location: Panama Republic of Panama Just put some CA or EPOXY glue and forget about it
Just pulling your leg
Why dont you put some velcro inside the battery comparment and some velcro to the battery itself. This way the battery will be attached to the TX with Velcro. Then you put some velcro to the battery door and some velcro to the side of the battery that face the door. This will keep the door closed.
Make sure to put enough velcro.......You dont want that the battery fail out when you are doing 3D
What you think?
Good luck,
Isaac
A little help goes a long way with some people, as it does here at RunRyder.
NEW 09-26-2006 09:06 PM PROFILE PM EMAIL POSTS BUDDY IGNORE ONLINE HOMEPAGE GALLERY Attn: RR
NEW 1 page 186 views