PDA

View Full Version : Outrage Case


vteknical
02-07-2010, 08:43 PM
Just got this from Helidirect and I'm liking it. Perhaps more than my old align case? We'll see with time.

ken22golf
02-07-2010, 08:51 PM
Wow, I've never seen this case before.

Looks like it's a good bit taller than the align case.

I don't think I like the idea of the Tx being under the tail though.

vteknical
02-07-2010, 08:57 PM
The boom is supported completely by the foam you will have push pretty hard to get the boom to touch tail to touch the radio. The radio is snug as a bug in there and will not move unless to force-ably persuade it.

I may take a close up to give is some justice.

Helico-pteron
02-07-2010, 10:03 PM
I don't think I like the idea of the Tx being under the tail though.
A small piece of foam over the Tx can fix that.

ken22golf
02-07-2010, 10:18 PM
A small piece of foam over the Tx can fix that.

And that's exactly what I did with my align case. I put a small piece of foam between the heli and the Tx. But with the align case, this was an optional thing. Looking at this one, I would surely do it. It's most likely fine, but I like to baby my transmitter.

ChrisH
02-07-2010, 10:18 PM
I still hate how when you close it up and carry it, the heli is upside down. You can flip the foam on the Align case to change this. Can you do this on the Outrage case as well?

vteknical
02-07-2010, 10:22 PM
I didn't think about the upside down thing but yes you can easily turn it around. I kind of like in the current position to me it would be upside down when you open the case.

ChrisH
02-07-2010, 10:25 PM
It would be, but I don't like to have my TX resting on it's antenna, etc ...

Helico-pteron
02-08-2010, 06:55 AM
but I like to baby my transmitter.
rightly so....

SnipeD_RNA
02-08-2010, 06:44 PM
I have this case, the transmitter is snug all the way around. I cut out all around the ant. so it dont matter the position the ant. cant touch anything. Its nice and roomy.

CDFrog29
02-08-2010, 08:43 PM
Get EXI case. Best bang for your buck. I fit 8 lipos, tx, heli, parts, tools, charger, everything in one case. Sweet!:tongue

vteknical
02-08-2010, 09:58 PM
This case will fit tools, 10.5 lipos, a charger, tools, blades, MSR, 200 1s lipos too.
Kidding aside this case will fit it all and some because it's a two level foam setup.

And it's 49.00.

ken22golf
02-08-2010, 10:01 PM
How much was the shipping? $49 is a good deal as long as the shipping isn't too much.

vteknical
02-08-2010, 10:34 PM
free because I order 101.00 worth of stuff from Helidirect. Otherwise something like 8$.

ken22golf
02-09-2010, 10:18 AM
Cool, most places would list a case like that as one not eligible for free shipping.

vteknical
02-10-2010, 09:46 AM
Now 44.95 @ Helidirect