dreslism
09-29-2006, 12:53 AM
I just got a replacement motor last night for one that went poof.
Went out for a flight test today to check everything out. Everything checked out Ok, so I strapped the mount on and took it up for a few picts.
My tilt is on a continuous turn servo and when I fly solo, that tilt is controlled via a slider. If I don't have the slider trimmed right, or I bump it, guess what the camera does. It slowly rotates up or down in the direction I bumped the slider.
Guess what I did right after takeoff? Bumped the tilt up. I then went up to about 200 feet and took a few minutes of pictures. Upon coming down I could see my camera rotated all the way up and almost backwards shooting the bottom of my heli.
Upon reviewing the images after landing, I noticed something in the pictures.
I turned 48 consecutive images into a .mov and let them play. Once the camera rotates all the way up, keep your eye on the top center of the picture.
http://greatlakesap.com/recent/passenger/passenger.mov
I had a passenger. These images were taken about 200 feet up!
Went out for a flight test today to check everything out. Everything checked out Ok, so I strapped the mount on and took it up for a few picts.
My tilt is on a continuous turn servo and when I fly solo, that tilt is controlled via a slider. If I don't have the slider trimmed right, or I bump it, guess what the camera does. It slowly rotates up or down in the direction I bumped the slider.
Guess what I did right after takeoff? Bumped the tilt up. I then went up to about 200 feet and took a few minutes of pictures. Upon coming down I could see my camera rotated all the way up and almost backwards shooting the bottom of my heli.
Upon reviewing the images after landing, I noticed something in the pictures.
I turned 48 consecutive images into a .mov and let them play. Once the camera rotates all the way up, keep your eye on the top center of the picture.
http://greatlakesap.com/recent/passenger/passenger.mov
I had a passenger. These images were taken about 200 feet up!