View Full Version : Tempest FAI Head (Instructions)
carlos
09-30-2006, 09:55 AM
Where can they be found.
DavidH
09-30-2006, 10:03 AM
http://www.miniatureaircraftusa.com/support/setups/tempest_fai_head_setup.asp
http://www.miniatureaircraftusa.com/support/kit_drawings.asp?kit='1022'
Those two links should help you.
David
carlos
10-01-2006, 05:57 AM
Thanks Dave yes they do.
I was chasing the correct linkage lengths.
Pitty the pictures can't be printed so I don't have to come back and forth from shed to PC.
I am finding it hard to believe that MA don't have PDF's for all aircraft.
DavidH
10-01-2006, 08:38 AM
Pictures can be printed. The Instruction Manual is on a CD, you can print it or read from it on the PC. MA went to this format for the instruction manuals about 3 years ago.
David
carlos
10-01-2006, 08:56 AM
Thats the Problem.
I don't have the CD for the Tempest FAI head.
I bought a Spectra G second hand which has a Tempest FAI head fitted.
The CD that came with the heli shows only the Extreme head.
So I have no instructions or printable/savable pictures for this head.
DavidH
10-01-2006, 09:22 AM
If I had the CD I would send you the file. You can probably get someone to send you the Tempest FAI rotor head file . I had two Tempest FAI's. But I never had instructions for them. I did/do have instructions for the FAI rotor head. But they are in printed form.
David
carlos
10-01-2006, 07:03 PM
Good idea Dave.
Does anyone have the file on CD they could send to me.
If MA had a downloadable file on there site like they do most other instructions and drawings it would take alot of the hastle out of something that should be so simple.
carlos
10-05-2006, 10:12 AM
Anyone !
DavidH
10-05-2006, 10:21 AM
Contact MA. They have the CD's there. I am sure they can get one to you for very little cost. Tell them you need the Tempest FAI instruction CD.
It is basically going to be the same as the instructions on the MA website for the 3D version.
http://www.miniatureaircraftusa.com/support/instructions/Tempest_3D_Instructions_Rev_6.pdf
Except it will have these instructions for the rotor head.
http://www.miniatureaircraftusa.com/support/setups/tempest_fai_head_setup.asp
Here is the drawing for the Tempest FAI
http://www.miniatureaircraftusa.com/support/kit_drawings.asp?kit='1022'
minair@miniatureaircraftusa.com <minair@miniatureaircraftusa.com>
David
carlos
10-06-2006, 10:44 AM
I have just sent a message to Bob.
Would be nice if this info was downloadable from MA site.