PDA

View Full Version : JR Venture 30 tips.


hurgh
10-02-2006, 07:33 PM
Hi All,

I am newish to the chopper flying, I have had my JR Venture 30 for a while now (nearly 2 years) but due to work and life in general, have not had time to fly it much.

I have just finished re-building after a small stack and have decided that the stack was due to bad setup.

I was wanting some help from other JR Venture 30 owners or people that have experience with these about some small details.

First up, can someone give me a basic pitch and throttle curve setup for the different modes, including what the main blade pitch should be for the different stick positions in each mode, and what the throttle curve should look like for each mode.

I know this info is specific to each person and chopper, but a place to start would be much appreciated.

I also have a question RE the led weights for the paddles. I had to get new paddles due to the crash that I had, and have fitted them, but have not put the led weights in them. Can someone please explain to me, if and why I need these, and also how to fit them if I do need them. There is little holes in the paddles for the weights, but do I need to balance them or something?

I have been to a club in my area and some people there were nice enough to give me some pointers, and I was told a brief setup for pitch and throttle but I have forgotten.

I have plenty more questions, but that will get me started. :)

Thanks for any help.

-Hurgh-

hurgh
10-03-2006, 07:55 PM
Maybe this would do better in the JR Forum.

I will re-post this in there then link this to it.

-Hurgh-

hurgh
10-03-2006, 07:57 PM
This has been moved to the JR Heli forum, please post any answers there:

NEW POST (http://www.helifreak.com/viewtopic.php?p=176733)

Thanks

-Hurgh-