can you convert a CT/SE to a gasser?

[Rckrzy1]

And is it worth it? I have a CT with CF frames and is basically an SE without the fancy tail. I also have 33" boom.

[DavidH]

You would need the gasser lower frames and spacers. Would probably need some spacers to adapt the servo tray to the lower gasser frames. The gasser has the plastic servo tray. The upper frames are the same on the Gasser, CT, SE.
You would also need the clutch system for the gas motor and the motor support for back of the motor.

http://www.ronlund.com/images/plans/xcell_gas/frame_assmbly.jpg

Would need the front plate also.


David

[Greg McFadden]

http://www.miniatureaircraftusa.com/bbs/index.asp?sub=show&action=posts&fid=7&tid=164

I asked a while back and got a wonderfull parts list

[Foxden]

The gasser has the plastic servo tray.
David

David, I have a Gasser SE and the servo tray is made from the same material as the side frames?

Clyde

[CARLOS LUIS]

See here, http://www.runryder.com/gallery/07764/ , you can see my new Xcell Gasser SE, It's named 3DEE. It is a stock 1005, with SE Servo Tray, and other upgrades. :mrgreen:

[bigrcr]

The SE radio tray is also made of carbon fiber, just like the gas frames. The upgrade makes a wonderful difference, but the rear rudder servo mount must be used. You can see my XL Gas SE in my gallery.

Later,