L10 stretch kit

[enigma]

slowly migrating into this forum from the ap section! I want to stretch my logo 10, does anybody know if the t/r control rod for the L14 is the same as the one for the stretch kit? I have the mik2483 here and noticed it's cheaper to buy the long boom/belt seperately if this one will work. Also, what size bolts does the L14 blade grip use, 3mm or 4mm?

[MrMel]

To make your own "stretch kit" you need boom, belt and t/r pushrod from the L14 kit, 2483 is the correct one.

(If you stretching a L14, you buy the L20 parts, or the kit that is complete)

For main blades L14 using 4mm bolt, tail blades its the same as the L10.

[enigma]

Thanks! do the L14 blade grips fir the L10 head assembly, or should I just get the 550mm with 3mm holes?

[Ace in the hole]

Looking at the parts blow ups in the manuals the 14 grips will not fit on a 10 without changing the bearings and spindle shaft too. I have been contemplating changing my second L10E's head to use 14 blade grips but have not done it yet. Hell I might just strech it a little farther and make it an L20E :lol: