G3 SIM edits to Match my Heli

[lperagallo]

I am looking for a file or edits I can make to RF G3 to better match my Heli. I can start with the base Intrepid Gasser, but my ship is teh EB and I have converted to 720s.

The other changes I have done is set the pitch range to +9-0-(-5). I don't think I got the longer tail set correct or the tail rotor blade length of 110. I did change the gear ration to 6.4 to account for the 14 tooth pinion I am now running.

When I've tried to make changes I find that at full throttle and collective the engine bogs and I lose head speed, even though I set the throttle servo to a governor and set the Head speed at 1650.

When I do fly it is seems a little to easy as compared to my actual heli. Any help in editing the settings is appreciated.

[PaulH]

The Gasser model in G3 is based on the EB variant, as mentioned by Chris in another post. I started playing around with it to see if I could convert it to a "normal" Gasser.

Since I can't attach a "plng3" file to this post, here are the changes I made:

- shortened tail to 33"
- moved the horizontal stabilizer from 2.2 feet to 2.0 feet.
- used 710 SAB blades
- reduced the dry weight a little (1 pound I think)
- pitch range is -9 0 +9
- cyclic is -5 to +5
- head speads of 1600, 1700, and 1750 in the governor.

Give it a shot and see what you think.