Fairview
03-04-2010, 10:22 PM
I have a B400 with all stock electronics. The tail both in rate and HH mode hovers really nice. However once I punch the throttle the tail starts twitching back and forth rapidly until the throttle is held constant for a couple of seconds. I put the tail control link on the 2nd hole from the center of the servo. I am using a JR 9303 with the following settings.
In the gyro menu position 0 - 2 are at 70% ( I tried at 45% and it didn't make a difference)
In travel adj. the rudder is 90% all others are 100%
Something I don't understand is that the gear switch(travel adj 100% in both directions) switches the gyro from rate to HH mode so how does that interact with the gain in the gyro menu?
In the gyro menu position 0 - 2 are at 70% ( I tried at 45% and it didn't make a difference)
In travel adj. the rudder is 90% all others are 100%
Something I don't understand is that the gear switch(travel adj 100% in both directions) switches the gyro from rate to HH mode so how does that interact with the gain in the gyro menu?