Hyperion LBA10 Li-Poly Balancer

[jet22b]

Hi All;

Can anyone out there give me the pro's and con's of this balancer.
Just pick this unit up today from RC Accessory.
I thank you all for any input!!!

Sonny

[Trooper Sam]

I've got two of them that I'm using, and I must say, they just WORK.

I use them on all of my 3S packs, TP Prolites, Apex Mk3s, and Hyperion Litestorms. Pretty much flawless. I also use them on my Align 6S2P 4400s. Again, flawless.

A note about these balancers, if you use the Align 6 cell packs, is that you need NO adapter. The Align balance connector (JST XH) actually will plug directly into the balancer, into the same spot that you normally plug the adapter cables. Perfect fit and function that way.

[malc1]

I been using one and as Trooper Sam says they do work well.Problem is because I`ve got a e-Station 902 charger which displays cell voltages I`ve had to go and buy a e-Station PB6 balancer as well as this is able to link into the charger to give you the extra data.
Pretty similar I think,I`m just trying the new one out now.

[RC Accessory]

The Hyperion LBA10 and the e-Station PB6 are very similiar when used in conjunction with the same make charger. Independantly, they work very well too.

The PB5 and PB-6 have a high discharge rate of 500 mah which is very very good for either high charge rates or charging faster than 1C on smaller packs.

You cannot go wrong with either one.

Evan Chapkis
RC Accessory

[sengle]

Hi Guys,

Can you get an adapter for the new FlightPower 4900s for this balancer?

Cheers from NZ!

[jet22b]

I want to thank you all for your input on this post. I know this money is well spent for this item. I see from other form site the e-Station is the top pick. I think RC Accessory will be getting a order from me soon!!

Sonny :D

[RC Accessory]

Hi Guys,

Can you get an adapter for the new FlightPower 4900s for this balancer?

Cheers from NZ!

I do not know what the balance tap connector is on the Flightpower packs. I think I read where one of the US sellers changes the taps to Thunder Power. Without knowing, you would have to make your own or find out what it is comptible with.

This is the biggest headache for users.

Evan

[WillJames]

The FP packs distributed for the last couple of months have the TP compatible Balancing Taps. We have some adapters available for those who need them to convert from the older style rainbo lead connectors.