e - Station PB6 balancer

[malc1]

Just got hold of one of the new e-Station PB6 balancers.
Does any know the correct sequence for the Green Error check LED?
Is it supposed to stay on all the time while charging/discharging?
Not too sure if things are as they should be at the moment.I`m trying it out on a couple of TP2100`s and I need to make sure all is ok.

[RC Accessory]

Hi Malcom, my shipment is due in this week of the PB-6's. Once I get them in, I can look into what you are asking.

Evan Chapkis
RC Accessory

[RC Accessory]

Hi Malcom,

I just tested the new PB-6.

When you connect the pack to the PB-6, the green error check LED with constantly flash indicating it is working. The red LED's are the individual cell LED's and they flash on and off meaning that cell is being drained to match the lowest cell voltage. This is how the PB-6 balances the pack without charging.

When done, all LEDs are off. I just balanced a 12C 2100-3S pack.


http://www.rcaccessory.com/ProductImages/PB6.jpg

Evan Chapkis
RC Accessory