View Full Version : flight power 4900 balance connectors ?
stankulas
10-10-2006, 04:12 PM
i just ordered a trex 600 an a 4900 flightpower pack it has 2 balance connectors on them they are both black and one has 6 red wires and the other has 3 reds and 1 black
i was wondering what kind of connector it was and how i would go about balancing the pack
thanks stan
RCHeliJim
10-10-2006, 06:01 PM
Its a thunder power connector setup. Get a TP 210 balancer and it will plug right in :D
stankulas
10-11-2006, 09:42 PM
has anyone tryed balance chargers for this configaration
RCHeliJim
10-11-2006, 11:09 PM
Always use a balance charger. Its the only safe way to charge a LiPo. I have a Flightpower 4900 and it balances great on the 210. So yes, I have tried it and it works well.
WillJames
10-13-2006, 08:40 AM
Mine are to .005 with the TP1010/210V :glasses2:
z11355
10-13-2006, 08:44 AM
use a 210 or I *think* you can use 2x Astro Blinky's
if you use a 210, use the connectors from either Bank A *or* B. NEVER one of each.
stevehonn
10-30-2006, 03:27 PM
They also plug straight in to the new V Balancers from Flightpower which is a charge-through balancer which controls battery and cell voltages while charging and can cut off the charger, it will also work as a passive balancer too.
The irony is all except one of my Flightpower packs have the old style balance leads and I had to buy adapters to use the V Balancers!