UFly binding with 2801E

[js349]

I just received my Ufly and bound it with my 2801E in 2401 stick mode. It was test flown before it was sent but I don't know what TX was used so I assume it flew correctly when tested. Anyway, the rudder stick inputs are apparently reversed and this is with all set to Norm in the REVERS screen. When I push the stick left, the swash leans right so the heli moves right and vice versa. So I went to the REVERS screen and changed the setting to REVS for RUDD but that didn't change anything. What do I need to do to fix this? :confused:

[miamiheli]

Not really clear if you solved the rudder (tail) issue but as for the swash moving opposite-

If the swash is moving the wrong way (left and right) you need to reverse the aileron setting. Same if forward and reverse are backwards, reverse elevator settings.

[js349]

Not really clear if you solved the rudder (tail) issue but as for the swash moving opposite-

If the swash is moving the wrong way (left and right) you need to reverse the aileron setting. Same if forward and reverse are backwards, reverse elevator settings.

Thanks much miamiheli! That was my problem. :thumbup:

[miamiheli]

Cool, glad I could help.

Have fun.