12z Plus CCPM AHHHHHHHHHH! HELP!!!!

[torkboy]

WOW that thing is complicated my gosh! OK here is whats going on i have it set up to where its in ccpm mode and thats bout it i can only get my pitch servo working and when i move my rudder stick the elevator moves and vise versa. pitch moves aileron servo aileron stick movement does not do aything. Good god that is one complicated radio! some one PLEASE help

[mudbogger2]

The output functions on the G3 reciever are laied out diffrently than the normal futaba rx's
Check to make sure you have everything plugged in the correct spot first.

[torkboy]

i just figured that but im still sorta lost my pitch use elevator and vise versa

[Rodney]

Find sombody that flies the same model as you and get there program and tweak form there. What do you fly as i have a few programs to start with

[rkeith2]

1 - Throttle
2 - Rudder
3 - Gyro
4 - Ail
5 - Ele
6 - Pitch

On the Knight 50 looking from the rear I use the right most servo as pitch, center is elevator and left is aileron.

You will need to choose the 120 swash and dial in the links as close as you can get them.

If your pitch is reversed, use the swash menu to take it from plus to minus or vice a versa. If the aileron / elev is reversed, use the radio servo reverse.

Hope this helps

[torkboy]

ok everything works righton the rotor my problem now is my tail it barley moves and it does not do the correcting when i move the tail 611

[rkeith2]

ATV's need to be 100% and then you can dial them back if needed on the 611 amplifier.

You are using the 9256 servo?

[torkboy]

yes

[torkboy]

all my atvs are at 100%

[torkboy]

k got the gyro working now the GV-1 is my next problem is there any SPECIAL way of hooking it up?

[torkboy]

got her all working now thanks guys