futaba 7cap on cp pro?

[scooby61]

the guy at the hobby shop told me that the stock receiver in my cp pro is compatible with my 7cap i'm try ing to use so i'll have dual rate and take the touchiness out of my cp. can anyone help me with setting up the radio.
i'm bilding a trex 450 and i had no problem setting the radio up for it. when i try on the cp the one servo on the back goes to full extension and my programming has no effect. i need swash type,reversing,and +- mixing if anyonne can help. :arggg:

[carlo_the_wonder_frog]

swash is HR3, Ail +, Ele -, Pit -. Channels 2, 3, 6 are reversed. Hope that helps.

[Pinecone]

There are some threads here and over an RC Groups with suggested setups for Futaba 7C and 9C transmitters.

I just started flying my Blade with my Hitec Eclipse 7 and am still working out the settings, but I LIKE it.

1) Less lgitching, the random drops in altitude are much fewer and much smaller displacement.

2) Throttle hold has reduced my parts bill. :)

[scooby61]

thanks alot carlo i'll try those and let you know how they work.

[scooby61]

too cold and windy for a test flight but on the bench looks good thanks! :wink:

[carlo_the_wonder_frog]

Glad that worked for you. Let us know how the test flight goes.