xircom
10-14-2006, 11:29 PM
So here the first full measurement, Volts Amps Temp Watt (not RPM will do later).
System (power components only)
- PQ 4S/3700
- Jazz 80
- Hyperion Z3025/10T (no fan)
- Deans
- (MS composit 420 blades, Quick EPv2 tail blades)
So I have 4 steps, all flights "sport flying" (very windy condition)
1) 0-2.5 min is 65% throttle (around 2400 rpm)
short break
2) 2.5-5.5 min is 55% throttle (around 2250 rpm)
short break
3) 5.5- 9.5 min is 50% throttle (around 2100 rpm)
4) leave low throttle and 0 pitch till Jazz finish (don't do this normally !)
Leave room here for own your own interpretation, just one thing -> temperature misleading, because cable not fully touching motor, so measured temp gun is around 60deg Celsius I made separately.
Hope that's all you might want to know, comments are welcome ...
Xircom (Michael)
System (power components only)
- PQ 4S/3700
- Jazz 80
- Hyperion Z3025/10T (no fan)
- Deans
- (MS composit 420 blades, Quick EPv2 tail blades)
So I have 4 steps, all flights "sport flying" (very windy condition)
1) 0-2.5 min is 65% throttle (around 2400 rpm)
short break
2) 2.5-5.5 min is 55% throttle (around 2250 rpm)
short break
3) 5.5- 9.5 min is 50% throttle (around 2100 rpm)
4) leave low throttle and 0 pitch till Jazz finish (don't do this normally !)
Leave room here for own your own interpretation, just one thing -> temperature misleading, because cable not fully touching motor, so measured temp gun is around 60deg Celsius I made separately.
Hope that's all you might want to know, comments are welcome ...
Xircom (Michael)