MrMel
10-16-2006, 06:30 AM
I have 3 paddles that the hole is not straight into the paddle, resulting the paddle to be "bent" upwards when attached on the flybar.
This I have on both L14 paddles (3.5mm) and Logo 20 (4mm)
I thought first it was me screwing them on wrongly, but after checking a brand new paddle which I just put in a smaller flybar, you can clearly see its off by a couple degrees, funny thing is that in that kit, one was OK, the other was not.
To fix it, I (now using 4mm flybar) took a L14 paddle which was made for 3.5mm and drilled it out with a 3.5mm drill, while drilling I made sure to drill straight.
Well, Im mostly using V-Paddles nowadays, but found that the heli was bogging more with V-Paddles, so I gonna go back to stock to compare.
Something to you might want to take a look at and see if its the same on yours.
This I have on both L14 paddles (3.5mm) and Logo 20 (4mm)
I thought first it was me screwing them on wrongly, but after checking a brand new paddle which I just put in a smaller flybar, you can clearly see its off by a couple degrees, funny thing is that in that kit, one was OK, the other was not.
To fix it, I (now using 4mm flybar) took a L14 paddle which was made for 3.5mm and drilled it out with a 3.5mm drill, while drilling I made sure to drill straight.
Well, Im mostly using V-Paddles nowadays, but found that the heli was bogging more with V-Paddles, so I gonna go back to stock to compare.
Something to you might want to take a look at and see if its the same on yours.