JR 7202 \ Futaba 401 \ Trex 450 SA WOW DO I NEED HELP!!

[Super D]

Here is the issue I am new to helis and have no idea where to start I have been flying for around 3 years and this is my first heli. I have searched the forums high and low for setup info for this combo and I cannot find it anywhere. If anyone has any ideas or places to find out please let me know. I have everything installed I just have no idea where to start on the programming and of things. Thank you all in advance for all of your help. :D :( :idea: [/b]

[zeus_zosma]

hello
do you have an hde or ccpm head first of all, the jr rx's usually have the channels marked as th,ail,ele,rud,gear,aux1,aux2 and so on. so get the right servo plugged into the right channel. MUST DO on helifreak you will find bob white's (finless) videos on the configurations, don't skip it. he explains everything to the t you can not make a mistake if you follow his instructions. and then finaly my two cents worth of insight. the trex 450 as a training heli, take it real slow these heli's are built to fly. they are quick, responsive and real tempramental at first. TAKE IT SLOW, if you let it this heli will fly you and thats not good. Go download Fineless's videos best advice
good luck
cheers

[jaminjer]

I swapped over my optic6 for the jr7202 a few weeks ago in my trex 450. I can help with some things as far as the radio goes. But like zeus_zosma said watch finless vids.

[jaminjer]

also this is a real good setup guide
http://www.horizonhobby.com/ProdInfo/Files/T-REX_450SA_ARF_Manual.pdf

[mistafied]

also this is a real good setup guide
http://www.horizonhobby.com/ProdInfo/Files/T-REX_450SA_ARF_Manual.pdf

This is a great link for SE owners.. Thanks for the Help.

[Jtschrock]

Just bought a used TRex 450se setup. Was wondering why the 450sa manual appears to have better setup information in it? You would think Align would put their best effort into the "Special Edition"
John :?