If buying a R90SE, what else is needed?

[R-4-L]

So far all I was able to find were these items:

1- 91T Main Gear (to make 8.27 ratio for OS engines).
2- Tail PV0499 S/S Tail Hub.
3- PV0498 Red Paddles.
4- Infinavation R90 Team Kit.
5- PV0460 Molded Composite FRP Canopy (maybe?)

Am I missing anything else? its just that I am currently comparing kits/prices.. please input anything that comes to your mind..

Thanks.

[Laurens]

Get a R90 std with metal hub instead. Cheaper, lighter and works just as good.

[R-4-L]

well, I was looking around for a new nitro kit to buy,
looked at aurora, but still not produced yet and don't wana try the first batch

looked at the synergy, got me worried coz (in my opinion only) it seems to me they'r having a few problems communicating with their manufacturers (ball links not correct length, clutch lining not correct length), and I don't fancy those G-10 frames nor pulling lots of stuff just to take out the engine.

stratus, Nop.

good old thunder tiger are gonna get my money.. I ordered the following (based on recommendations from some people).

Raptor 90 SE, OS.91sz PS, SB18, GY611, 3x Airtronics 94758Z, Hitec HS-625MG (throttle), Quick UK Fan, Infinavation R90 Team kit, TT carbon tail blades, TT red paddles, TT 710mm blades, 91T main gear (1:8.27), GV-1., PV0499 S/S tail hub, PV0416 tail control rod to mount the servo in the front.

I also ordered some frame washers so that I can flip the flybar control arm and therefore be able to use the inner hole on the seasaw without needing to buy metal levers ($7.49 vs $70).

no matter where I go, its Raptor-4-Life :?

.

[Kinger]

Looks like you have a nice machine coming there.