PDA

View Full Version : My New Lepton Setup

eheliflyer
10-23-2006, 12:53 AM
Kontronik Jazz 55-10-32 with Medusa 3.5A 6V BEC
Kontronik Kora 15-10 Brushless Motor with Kovi's 19 T pinion
FlightPower Evo 20 5S 3700mah
Airtronics Z94761 servos on cyclic
Futaba GY 401 and 9254 with 5.1 stepdown
HDX 425 CF main blades
HeliUp programable paddles with the weights installed
Kovi's washout slider block
TT Raptor CF tail boom support
Custom made 3mm CF push rod
68mm CF tail blades from ReadyHeli
MJP Base kit, Lift kit, Frame support, and front and rear brace supports.

The Kontronik Kora 15-10 has crazy power. It is the strongest motor I have tried on the Lepton. I have tried the Hyperions and Hackers and they don't come close. It is also extremely effecient. I am extremely happy and impressed with this setup.
My HS is about 3100-3200 rpm at 70% and 75%. This motor has tons of torque.
And my pathetic attempt at a paint job.LOL
petmen
03-26-2007, 03:10 PM
is an 4s setup with 3k possible with fp3700
eheliflyer
03-26-2007, 03:15 PM
It is possible depending on the which motor you use and how many tooth pinion you use.
petmen
03-26-2007, 03:54 PM
Kontronik Kora 15-10 that wear i was looking for.
eheliflyer
03-26-2007, 03:57 PM
Yeah you could easily get over 3000 rpm on 4S with the Kora 15-10.
petmen
03-26-2007, 04:02 PM
ok thanks
i am cone bay the gora 15-10 with a cc 80 en i think i need a 20 or a 21 gear.


sorry fore my bett english.
eheliflyer
03-26-2007, 06:36 PM
The 22T pinion should be perfect.
gtrick90
04-08-2007, 02:29 PM
I've tried the Kontronic Kora 15-10 in my Lepton EX: simply AWESOME!!!!!!

Following my setup:

- Hirobo Lepton EX
- 3 x Futaba s3150
- Futaba GY 401 + s9254
- Futaba r149DP PCM
- Main blades MS Composit CF
- Paddles Gorilla-Pro
- 3Dx500 metal tail assembly (modified by me)
- Robbe Spirit's plastic tail blades
- ESC Kontronik 80A in gov-mode
- Kontronik Kora 15-10
- RevCo 18T pinion
- FP EVO 20 NF 5S1P 3700mAh batteries
- TRex 600 CF tail boom support (shortened)
- some MPJ's stuff

1.800grams w/batteries
poerqwa
04-12-2007, 04:39 PM
So what about flying times with your kora setups?

Greetz,

Marc
6sic6
03-13-2008, 10:33 AM
Hi guys,
I see that some of you are using HDX parts on your Leptons. Who knows whether or not the HDX metal washout arms will work on the Lepton?