teck head on my 4#6

[shaggybirdman]

ok who's got a teck head on there 4#6? i want it, but gotta get parts yet. how much better does it fly over the stock head?

[Naterpin]

http://www.nanoheli.net/nanoheli/

You can buy it from chinese jade. I think i "might" try it in a couple weeks but i will swap out the head with the tech head i have.
No I have not flown the head with my heli yet. I am short some parts.

[shaggybirdman]

i did, but it's in german. i also looked on chinese jade for the teck head, but couldn't find it. his site can be challanging to find stuff . can you link me to the compleat (i take it you ment he had a compleat head setup) teck head.

[PittJitsu]

Ok now I want to see as well.. I also got reminded of the stabilization unit. Cant wait to buy that.

[Naterpin]

They are two every different heads

techhead kit
http://www.clubheli.com/Complete-Red-TechHead-Kit-for-the-Walkera-46_p_2557.html


This one looks like a cb100 head for the 4#6 "basicly makeing the 4#6 fly like the cb100
It is at the bottom of the parts page.
http://www.chinesejade.com/walkera4_6.htm

[shaggybirdman]

ok i thought it had the flybar under it at a angle is all. cool. it looks to be a full replacement right?

[Naterpin]

yup.

[shaggybirdman]

just ordered it. my 4#6 has issues going in reverse, so hopefully this will cure that, and make it fly better like my cb100. that would make me REALLY HAPPY!! :thumbup:

[Naterpin]

I would like to give it a try too. But I will definitely do the Tech head mod.

[shaggybirdman]

i think if you have to buy everything it will end up the same cost as getting the one from Chinese jade.

[AtTheCross]

i have it and it is AWESOME!!! super fast cyclic response expensive when you add all the parts (unless you have them on hand) but it is worth it.

now there's a video out with the techhead AND the 3 axis gyro flying in 21mph winds with 30mph gust, now i'm ALWAYS skeptical with people's wind estimates but if you look at the foilage you can tell it's really windy and i don't doubt the wind speeds

sorry at work can't youtube otherwise i would post the link

[AtTheCross]

here's the TH and 3 axis gyro in CRAZY WIND

http://www.youtube.com/watch?v=z5iu8LBEP78

[shaggybirdman]

that's impressave. i want that rx for my 4#6. i'm waiting on my head from Chinese jade.

[AtTheCross]

don't know if that's the same head, if it's 45* then don't know how it will do. looking forward to hearing from you on that head.

i have the first gen 54* tech head and the 3 axis gyro, already have the head installed, will install the new rx this weekend sometime :D

yeah, every time i see that vid, i'm jazzed!

[shaggybirdman]

i'm not sure what degree it is, but looks like a 45*. hey it's gotta be better than the stock head. mine won't go backwards very well, and to say it's a handful is a understatement. if i decide to get another walkera it will be the not released yet cb180z.

[polycapman]

Hi guys,
Any Info for 4#6 Bell Head?
4#6 Bell VS Techhead, Which is the better performance?

Thanx ;)