PDA

View Full Version : ....What motor are you running on your Shogun/Zoom ?

Pages : 1 [2]
turboomni
10-08-2004, 08:53 AM
Justgofly 400DH
turboomni
10-08-2004, 08:54 AM
Justgofly 400DH
Pipefish
10-08-2004, 09:06 AM
Himaxx 2025 4200 (not yet using it but purchased).

My Shogun did not arrived yet from China :(
turboomni
10-16-2004, 11:15 PM
400DH from justgofly and a 8T pinion,,GREAT!!
Also use the TP2100. With this setup there is so much power from the motor ,[it could care less about the extra weight] that I may go to SEARS and get a DeiHard battery to stick in the Heli!
turboomni
10-16-2004, 11:17 PM
400DH from justgofly and a 8T pinion,,GREAT!!
Also use the TP2100. With this setup there is so much power from the motor ,[it could care less about the extra weight] that I may go to SEARS and get a DeiHard battery to stick in the Heli!
WM2H
12-13-2004, 10:30 PM
Razor RZ-24-3650 with 9 tooth pinion and TP2100 lipos

S.
Kenji
12-18-2004, 10:01 PM
waiting for my setup to arrive.Himax 2025-4200, CC25, Kokam 1500 Lipo. And I think that I will try the 9t Pinon. Seems to be the choice. Wish me happy landings
TGoodwin
02-16-2005, 02:57 AM
Whats the deal with the Himax shaft length? It seems too short. Have the 2025-4200 and 8t pinion to install.

??????

Thanks ted
Kenji
02-16-2005, 10:23 AM
It is to short but it is not a problem. You have to turn the gears around on the tail end so the tail rotates the right way. Mine is setup this way and I haven't had any problems.
Kenny
Jaso
02-23-2005, 04:10 AM
I got the justgofly DH400 in my zoom and I love it .
Good little motor and great service from Vinnie.
I'm using a kokam 3s 15c 2000mah pack and it all runs nice and cool with a 8 tooth pinion.
Great power and a very light motor at a good price.

Cheers,
Jason.
bluealien
03-11-2005, 08:34 PM
hi all, i'm new to rc anything, weel i've been flying heli for a couple of months now. i bought a shogun and want to put a himax motor on it. the only problem is the pinion gear. i'm wanting to use a 10 tooth, but the slide on and off ( not tight) should it be glued on with loctite. its a 2mm bore. and the pinion just slides off with ease.
thanks for any help.