Mini-Tutorial: 12Z Calibration Utility

[IcemanCharlie]

Strange..

I have created this in my Vista and I can see that the file is a Configuration Settins file and not a notepad file.

I created a file on the card with NOTHING on it and it says:

T12ZTEST.ini

and in the file it's written:

Execute T12Z Test Program

And my 12Z just ignores teh card :-(

EDIT:

I can see that You have not the same soft in yours:

I have the one from Futabas site and it says 17 June 2008

http://www.futaba-rc.com/sellsheets/index.html

Looks like I have a newer one !!!!!!

This version includes the SWASH RING

[DavidH]

Don't know what to tell you then.
I have the latest update from the Futaba/Hobbico site here in North America. I check and see if the command works after every update I have installed. It has always worked.
The service menu is what is used to calibrate the sticks and switches, change from heli to aero, change region coding, several other things.
Don't think it would be disabled for any reason. This is the same function that is used when the service menu needs to accessed to service the tranny.

David

[IcemanCharlie]

Futaba/Hobbico site here in North America ??

www.Site ?!

[DavidH]

http://www.futaba-rc.com/
http://www.futaba-rc.com/sellsheets/index.html

David

[IcemanCharlie]

Well from that site You are going to have the same version as I have and NOT the one You have.

- 1 -
1M23N16910
T12Z Software Update
(Editor Version:1.3.2, Encoder Version:1.39)
CAUTION
To support new features model memories must be updated to version 1.2.0. Once the 1.2.0 update is installed
into your transmitter, the model memory update will automatically occur when you select the model the first time.
After this update has been performed the model memory will no longer be compatible with software versions prior
to 1.2.0.

Could this be the problem or....

Is it possible to downgrade the software to your:

Editor and Encoder V 1.2.0 and 1.38

And were to find them since they aren't on Futabas site :-(

[DavidH]

Well that is the last update I have.
When I go into the Information screen

Editor / Encoder V 1.2.0 1.39

But I am using 50 mhz module. Now when I install the 2.4ghz module the editor and encoder may change versions.
I have had a 2.4ghz module in my tranny and used it to fly a model. It was someone elses and I just borrowed it to make sure the update was working.

Here is the update information for the latest 12 Z update on the link I gave you.
http://www.14mz.com/downloads/T12Z_update_V1.doc

David

[IcemanCharlie]

FINALY!!

I'm running Vista Ultimate under Bootcamp on my Mac and...

I picked up an old PC with XP ( NEVER to be used again I said when I change to my Macs ;-)

I the figgured out that my file extension were not just ***.ini but ***.ini.ini !!

ALL this because of MAC :-) !!!

Well I can now confirm that even a 12Z in Europe model accept this !!

To You DAVID , I'm sorry for all the time I took from You and sincerely Thankzzz :-)

[DavidH]

Glad you got it to work. I would have never questioned what type PC you was using. I saw you was using VISTA, so I would have never thought you was using a Mac. <G>

Yes I would see where two .ini at the end would confuse the sofware. LOL

David

[RainbowRising]

Hi to all of you,

please confirm what I have understand.

If I update the software from

1) Editor / Encoder V 1.2.0 1.39

to

2) Editor / Encoder V 1.3.2 1.39

I will lost the possibility to use the the *.ini file to calibrate the radio?

[IcemanCharlie]

NO problems!!

I HAVE v 1.3.2 and 1.39 and...

I can use all the files and that's on a Z12 from EUROPE ( Sweden)


Go for it :-)

[IcemanCharlie]

David...

I saw this from You:

******They all work for me except the SETRX one. I am interested in messing with that one. Just have to figure out why it won't boot up.

David*******

Have You been able to "play" around with Your 2.4 RX now or...

I just have a question:

"IF" I would like to have mooore power on TX 2.4 and bought the modules (RX&TX) from US, would it than be possible to change the modules to a Europe version with this ini-file?

[DavidH]

The SETRX I don't think will work with 2.4ghz. It supposely works with like 35 mhz, 72, 40mhz and receivers that used a set frequency.
Supposely it allows like a 50 mhz 5014 receiver to be change to a 72 mhz rx thru the software. I never could get my tranny to recognize the file to do this.

As for 2.4 ghz, I believe most of it is controlled by the software in the radio. At least to posts I have seen made from people that changed the region code on there trannys that seems to be the case.

David