Hirobo Bell 47G Setting need help.

[leong]

hi all,

i have gasoline 1/6 bell 47G setting need to help.
1) pitch setting
2)what is the head speed
3)after hover the heli clucth smelly.


thank you,

Leong

[WayneBrown]

pitch: -4 to +9 or 10.
1650 on the headspeed.
If it's a new machine, the clutch may be burning in, keep an eye on it and see if it's slipping.

[Heli_jack]

Well, depends on the blade length and weight, and the weight of the machine.

Is this a Gasser or a glow powered machine?
Blade sizes.

I am assuming gasser, with blades near 800,
-2 to 10 or so, head speed about 1200-1400 rpm

Again, my assumptions are based on 800 mm baldes on a gasser

[leong]

hi wayne, jack.

this is a Gasser machine and my blades is 800mm

thank you for your infomation.


leong