Spacer for engine mount from 8.45 to 8.18

[X]

I am using 8.45 mount on my Extreme and I am going to change it to 8.18. Do you know the part number for the spacer that will convert from 8.45 to 8.18 for the motor mount.

Thanks,
x

[DavidH]

You will need .060 in shims on each side of the mount. The 115-50 and 51 mounts are for the 8.18. They use (1) .030 shim on each side for 8.18.

The 119-50 & 51 mounts are the 8.45 mounts. They have .030 less material than the 8.18 mounts.
So you need .060 in shims to add to the 8.45 mounts.
I believe the .030 shims are part number 115-47.

David

[X]

Thank you David.
X