PDA

View Full Version : Good cyclic servos for 450 3G


Aussie_phoenix
04-27-2010, 07:39 PM
OK - finally been burned by my Align 410Ms. After a light crash with my 3G system stripped gears on all 3 cyclics and when replacing gears found that the motor (or whatever the correct technical term is) had busted loose in one of them. Coupled with this the aparrent 30% premature failure rate of these servos I'm looking to put something different on my 3G system. Don't really want to go with Hitec HS5065s as they are a bit slow at 0.11 sec when the 3G manual specifies less than 0.09 sec.

Any ideas on other digital servos that run under 0.09 sec, possibly inolab or MKS.


.