View Full Version : 96T/Mod 1 in L14
MrMel
10-30-2006, 05:01 PM
Is the 96T mod 1 main gear a drop in replacement for the 138T in the Logo 14 or do I need any more parts?
OICU812
10-31-2006, 03:23 AM
Best to ask Alu-Swash this question as he uses it in now L14, I do think it is a straight drop in though... :dontknow
Daniel Jetschin
10-31-2006, 03:50 AM
Yes it'll fit in there just fine.
helidawg69
11-23-2006, 03:52 PM
Danny,
Do you use the 96t on the main and the 138t for the tail on the L14?
Thanks
MrMel
11-23-2006, 04:00 PM
You can if you want to, I decided to mod it to use 96 for both.
You need the L20 tail gear for that.
OICU812
11-23-2006, 04:13 PM
You used a 96T on the bottom as well? Is the ration different than the stock L14? I run the 138T with the logo 20 front pulley currently..mod 0.7. What would the mod 1 front tail pulley be from the Bionic or what...?
MrMel
11-23-2006, 04:16 PM
Lol, never gave it a thought on the ratio even :)
I have to go down and count the teeths..
MrMel
11-23-2006, 04:26 PM
Its 20T, so the ratio is 4.8:1
Partnumber: 2487, I actually thought it would be for the 138T, but when I got it, it was Mod 1 so I said, fine and fitted it...
The mod 0.5 is 40T so that have a ratio of 5:1
I now realize that its partnumber 3001 that is the mod 0.7...
Edit again: 0.7 gear pulley is 28T, so the ratio is 4.92:1
OICU812
11-23-2006, 04:45 PM
Hmmm wonder how that is going to work, keep us posted. :hug:
MrMel
11-23-2006, 04:49 PM
It works just fine, I have 18 flights on it with it mounted :)