View Full Version : Major CP Pro Problem
fasterjman
10-31-2006, 09:11 PM
I recently repaired my CP PRO and now when I go to take off at around 3/4 to full throttle the heli rolls over to the right, does anyone have any idea as to why this is?
dr5liter
10-31-2006, 10:36 PM
check you servos, unhook them from the swash plate and move them up and down by hand with no power and see if you feel a click in it or with power on and motors disconected and do it with the radio and listen for buzzing, they are rebuildable servos for like 3 bucks for the gears or a new servo for like 15 bucks.
with the motors disconected and applying full power the swash plate should move up on all 3 servos. hope this helps
Funky
11-01-2006, 03:42 PM
with the motors disconected and applying full power the swash plate should move up on all 3 servos. hope this helps
Actually for the Blade, applying full power should move the swash plate down to give positive pitch.
Fasterjman, I had the same problem after a crash and it was a stripped servo causing it.
dr5liter
11-01-2006, 03:57 PM
yep your right what was i thinking :arggg: