PDA

View Full Version : Gryphon auto booster glow ignitor


HeliBenj
05-06-2010, 04:19 PM
So I'm switching to FBL and decided to go from align 2in1 reg to a separate higher rated reg. I chose the ElyQ as I got one for a very good price.

As I'm losing the 2in1 glow function, I'm giving this device a try:

http://www.gryphon-mall.com/product.php?id_product=24

Basically like a switchglo but half the price on ebay. I just couldn't spend the $ on a switchglo which seems a bit overpriced to me for such simple a device.

Has someone tried one of those yet?

I'll let you know how it goes when I get it (2-3 weeks :()

Fluidtech
05-06-2010, 05:14 PM
yeah i looked at those

please post your thoughts once you get it in.

Gryphon
05-09-2010, 11:06 PM
:lol:
I appreciate for your interest.

If you wonder anything about the Auto Booster

or need help , don't hesitate to contact us.

Thank you.

johanngj
05-10-2010, 01:33 AM
Hi, can the built-in buzzer be disabled? Or will it make a noise as long as it is heating the plug?

HeliBenj
05-10-2010, 11:26 AM
:lol:
I appreciate for your interest.

If you wonder anything about the Auto Booster

or need help , don't hesitate to contact us.

Thank you.



Good you're here!
I didn't understand the manual fully: the part about the jumper. Do you have to match the voltage of your receiver? For instance if my receiver is powered at 5 volts, I put the jumper in the 4.8 plug?

Gryphon
05-10-2010, 10:10 PM
it is made to work automatically while heating plug.

if you don't want buzzer, i can send you after removed.

thanks!

Gryphon
05-11-2010, 01:31 AM
You are understanding well. You can put the jumper in a booster which has the closest voltage to the receiver voltage.

When the red-heat intensity of a plug is set to be weaker than the
basic setting value, please insert after moving a jumper connector to
be lower than its own voltage connector.

HeliBenj
05-11-2010, 11:48 AM
:thumbup: I hope I receive it soon and I will report back when testing it.

francowong7828
07-21-2010, 11:28 PM
hi gryphon,
i am having a question about the jumper within the auto booster. knowing that align 2in1 regulator voltage is 5.8V, where should i place the jumper in the auto booster? in the 6V slot? on the other hand; if i am using a duralite 7.4V regulator, the the jumper within the auto booster should then be slot into the 7.4V socket?

kindly advise.