Register Now

Jason Bell · 11-03-2006, 09:41 PM

what is in your guy's opinion's is the best blade for the trex?

Im wanting to get some SABs

AlpineCH.21 · 11-04-2006, 02:25 AM

yeah, SAB's are probably the best on the market right now...just wait till the Curtis Youngblood Radix blades come out. Really nice, but just fly the 325 Woodies, absolute best bang for the buck. I think they auto better then SAB's too.

Jason Bell · 11-04-2006, 08:46 AM

i wont be autoing that lil booger when i get it

i do enough with my two other 50's

Flynall1 · 11-04-2006, 09:53 PM

You will if you have to.... I did my first full down auto with the main shaft broke...

I figured that I stripped the main gear, but on inspection there was no pinion or main sahft to be seen. I was pretty surpised to say the least. The best surprise was the full down auto with zero damage! No tip and just one small bounce...

RH

bmlasater · 11-05-2006, 03:59 PM

fwiw..

Imho...

Hyperion 325...Best blade on the market now...

John.

KamikaziRcPilot · 11-05-2006, 07:42 PM

Google this:

High Quality 325mm Symetrical Carbon Fiber Main Rotor Blade

gagi · 11-06-2006, 02:20 AM

Anyone know where one can get a good deal on those Hyperion 325s?

-Gagi

scalci · 11-08-2006, 01:16 PM

What about the Align (HS1172-00) 335 Pro Blades?

steve28 · 11-08-2006, 06:12 PM

I ordered a set of blades from Helidirect , they are

Platinum Carbon Fiber Blades Collection (HDC-1133) = $39.95

good deal I think, the kit comes with 325 main blades , tail blades, and paddles . Thought I would give them a try.

AdrianM · 11-08-2006, 06:29 PM

I have the same ones. They are unbranded Hyperions. They fly great. You will be surprised how crisp the response is with the carbon main blades.

KamikaziRcPilot · 11-08-2006, 06:35 PM

I dumped my T-Rex over the weekend with a set of these blades. It hit hard on its side at about a 45 degree angle. The grips were still attached to the blades. The feathering shaft snapped between one grip and the head. Not even a slight scratch on either one. I think they're a great value. They fly very crisp and are much quieter than the 325mm Pro Woods.

Jason Bell · 11-24-2006, 05:12 PM

Well got the rex and picked up 2 sets of the SABs

give me a couple test flights and those SABs are gonna be on it like white on rice, but test flights will be done with the pro woodies just incase something happens :mrgreen:

flymike · 11-24-2006, 05:33 PM

Check out the topic (CF mains) on page three.

11-03-2006, 09:41 PM	#1 (permalink)
Jason Bell Registered Users My HF Map location Join Date: Jun 2006	Best blade for trex what is in your guy's opinion's is the best blade for the trex? Im wanting to get some SABs __________________ Representing: AMain Hobbies, XNova Motors

11-04-2006, 02:25 AM	#2 (permalink)
AlpineCH.21 Registered Users Join Date: May 2006	yeah, SAB's are probably the best on the market right now...just wait till the Curtis Youngblood Radix blades come out. Really nice, but just fly the 325 Woodies, absolute best bang for the buck. I think they auto better then SAB's too. __________________ ...Please have you MasterCard out and ready after each flight...

11-04-2006, 08:46 AM	#3 (permalink)
Jason Bell Registered Users Thread Starter My HF Map location Join Date: Jun 2006	i wont be autoing that lil booger when i get it i do enough with my two other 50's __________________ Representing: AMain Hobbies, XNova Motors

11-05-2006, 07:42 PM	#6 (permalink)
KamikaziRcPilot Registered Users Join Date: Sep 2005	Google this: High Quality 325mm Symetrical Carbon Fiber Main Rotor Blade __________________ "I'm currently out of my mind or have stepped away from reality! Please leave a message..."

11-08-2006, 01:16 PM	#8 (permalink)
scalci Registered Users Join Date: Nov 2006	What about the Align (HS1172-00) 335 Pro Blades? __________________ T-Rex 100S (Non Flying) T-Rex 600 (Non Flying) T-Rex 450 (Non aflying) Eco 8 (Grave Yard)

11-04-2006, 09:53 PM	#4 (permalink)
Flynall1 Join Date: May 2006	You will if you have to.... I did my first full down auto with the main shaft broke... I figured that I stripped the main gear, but on inspection there was no pinion or main sahft to be seen. I was pretty surpised to say the least. The best surprise was the full down auto with zero damage! No tip and just one small bounce... RH

11-05-2006, 03:59 PM	#5 (permalink)
bmlasater Registered Users Join Date: Jun 2006	fwiw.. Imho... Hyperion 325...Best blade on the market now... John.

11-06-2006, 02:20 AM	#7 (permalink)
gagi Join Date: Jul 2006	Anyone know where one can get a good deal on those Hyperion 325s? -Gagi

11-08-2006, 06:12 PM	#9 (permalink)
steve28 Registered Users Join Date: Jul 2006	I ordered a set of blades from Helidirect , they are Platinum Carbon Fiber Blades Collection (HDC-1133) = $39.95 good deal I think, the kit comes with 325 main blades , tail blades, and paddles . Thought I would give them a try.

11-08-2006, 06:29 PM	#10 (permalink)
AdrianM Registered Users Join Date: Aug 2006	I have the same ones. They are unbranded Hyperions. They fly great. You will be surprised how crisp the response is with the carbon main blades. __________________ www.RevCo-RC.com We make stuff that works like its supposed to!

11-08-2006, 06:35 PM	#11 (permalink)
KamikaziRcPilot Registered Users Join Date: Sep 2005	I dumped my T-Rex over the weekend with a set of these blades. It hit hard on its side at about a 45 degree angle. The grips were still attached to the blades. The feathering shaft snapped between one grip and the head. Not even a slight scratch on either one. I think they're a great value. They fly very crisp and are much quieter than the 325mm Pro Woods. __________________ "I'm currently out of my mind or have stepped away from reality! Please leave a message..."

11-24-2006, 05:12 PM	#12 (permalink)
Jason Bell Registered Users Thread Starter My HF Map location Join Date: Jun 2006	Well got the rex and picked up 2 sets of the SABs give me a couple test flights and those SABs are gonna be on it like white on rice, but test flights will be done with the pro woodies just incase something happens :mrgreen: __________________ Representing: AMain Hobbies, XNova Motors

11-24-2006, 05:33 PM	#13 (permalink)
flymike Join Date: Sep 2006	Check out the topic (CF mains) on page three.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in