8103/TJpro/gy601 setup.

[ssuterus]

can anyone give me some ideas on setting up the 8103 for the TJ pro and GY601. what switch/ channel should i use for the gov and can i mix this into my flight modes?e.g. off in normal and on in stunt1 & 2. also how do i set different head speeds in stunt 1 & 2? then, do i need to allocate a switch for the gyro to swap between HH and normal mode, or just set it in avcs and leave it?I have them installed in a titan 50 with TT50 motor.

p.s. any figures for setting headspeeds would be appreciated.
cheers pete.

[ssuterus]

can anyone give me some ideas on setting up the 8103 for the TJ pro and GY601. what switch/ channel should i use for the gov and can i mix this into my flight modes?e.g. off in normal and on in stunt1 & 2. also how do i set different head speeds in stunt 1 & 2? then, do i need to allocate a switch for the gyro to swap between HH and normal mode, or just set it in avcs and leave it?I have them installed in a titan 50 with TT50 motor.

p.s. any figures for setting headspeeds would be appreciated.
cheers pete.

[DavidH]

Over 6 months and this model is still not flying?

David

[ssuterus]

yeah its goin, just curious as to the best way to set it up. I currently use my gear switch for governor on / off and my rudder D/R switch for gyro normal / HH modes. Gov has one set headspeead at present in all 3 modes, and is not mixed with the flight mode switch with it being activated above 25% throttle in normal mode.