One long beep, then three short....

[bugbitten]

Then nothing. No blinking lights. No movement . No sound.

OK ...... I bought used.

Where do I start?

I eased the esc out of the frame and the same for the receiver 6100e. As I was easing out the motor wires I noticed one was stuck to a servo. Exposed a little copper freeing the wire. Looks like it got hot in there.

[bobbydo]

i dunno about ur problem but who did u get ur heli from?

[dazzzer30]

Originally Posted by bugbitten

Then nothing. No blinking lights. No movement . No sound.

OK ...... I bought used.

Where do I start?

I eased the esc out of the frame and the same for the receiver 6100e. As I was easing out the motor wires I noticed one was stuck to a servo. Exposed a little copper freeing the wire. Looks like it got hot in there.

if i was you i would start from the ground up and more over how the hell did you motor wire get stuck to a servo

[bugbitten]

Originally Posted by bobbydo

i dunno about ur problem but who did u get ur heli from?

A helifreak member.

[bobbydo]

i just wonder sum1 bought my dx6 for themself so they said then stuck it with there heli that day to turn a profit here n madville lol
its theres tru but where is the honor
dont bs me to get a better deal!

[Larry227]

Originally Posted by bugbitten

Then nothing. No blinking lights. No movement . No sound.

OK ...... I bought used.

Where do I start?

I eased the esc out of the frame and the same for the receiver 6100e. As I was easing out the motor wires I noticed one was stuck to a servo. Exposed a little copper freeing the wire. Looks like it got hot in there.

Is the esc plugged into the rx correctly? Right direction and place? Does this heli have an external BEC?

[bugbitten]

Originally Posted by Larry227

Is the esc plugged into the rx correctly? Right direction and place? Does this heli have an external BEC?

real noob here!

what is right direction and place?

no external BEC.

Thanks

[bugbitten]

OK. I found the connection online. Everything seems to be properly connected.

No flashing light on the receiver.

[Larry227]

Did it come with a radio? If so is it set to the right model? If not did you bind it to yours correctly and is it on that model? No matter what the answers, I would do a re-bind.

[Larry227]

Assuming the rx is a AR6100e here's where the plugs go.
https://www.helifreak.com/album.php?...ictureid=27623

[newhelliguy]

Bring me your heli

Terry

[bugbitten]

Originally Posted by newhelliguy

Bring me your heli

Terry

I did... and Terry performed wonders over 2 days. The heli is ready to fly.

Thank you, thank you, thank you........

Doug

[bladeron]

Allright Terry, good on ya dawg.

[bobbydo]

yea esp in these neek of the woods terrys the man on the 400's

[Larry227]

Care to share what the problem was?

[newhelliguy]

the bec in the esc was not working so he was getting no power to the receiver. I think the beeping is normal for the ESC. He had a sport bec and that solved the problem. I installed the 65's and set up the head and He bought a 520 at the LHS and with the 9257 the tail was rock solid. The wire he thought was burned had had glue dripped on it and stuck it to the servo and when he pulled it out it ripped the covering. It flew great and now he has the job of learning to hover.

Terry

[Larry227]

Cool. btw, the beeps come from the motor.

[newhelliguy]

The signal for the beep comes from the esc the motor is like the speaker.