View Full Version : No conection whith my reciever
Rallysmultron
11-11-2006, 12:40 PM
Today i tryed to get some connection between my mz14 and the receiver.
I have done like the manual is telling me to do. Ive set the receiver idnr
in my radio but no connection??
Anyone have some ideas??
Anders
andersnorlin
11-11-2006, 01:03 PM
Today i tryed to get some connection between my mz14 and the receiver.
I have done like the manual is telling me to do. Ive set the receiver idnr
in my radio but no connection??
Anyone have some ideas??
hAnders
Try this http://www.helifreak.com/viewtopic.php?t=22242
torkboy
11-11-2006, 07:42 PM
on the first beep try turning on the power to the rx. it wokred that way for me
MrMel
11-12-2006, 02:20 AM
Also notice that you WONT get a confirmation except the pulse on servo 1 which is easy to miss.
When you get the Retry button, press end and start sending to really test if it worked or not, you might have succeeded without knowing..
Finless
11-12-2006, 10:55 AM
When all else fails use the DSC cord.
I have found a wireless network, EME noise from a PC, or even flourescent lights can effect how well this works.
Bob
torkboy
11-12-2006, 04:25 PM
haha DSC cord never worked for me :dontknow
Phaedrus
11-13-2006, 11:13 AM
Also notice that you WONT get a confirmation except the pulse on servo 1 which is easy to miss.
When you get the Retry button, press end and start sending to really test if it worked or not, you might have succeeded without knowing..
This is so true. I helped a guy the other day who SWORE he could not get his 14MZ to change channels. It turned out that he never actually moved the sticks after trying to change channels. He was looking for the channel 1 twitch, did not see it and concluded that the change did not happen.
So as dumb as this sounds, wiggle your sticks to see if it worked!!