3secondsToImpact
11-11-2006, 10:34 PM
I could use as much input as possible on which would be the better and long term choice between the Jeti Spin 66 and the Jazz 80-8-16 ESC.
Just Smoked my CC80(long story) was using internal BEC so i thought i would try external BEC, got a ultimate UBEC 6v output, installed as per instructions including removing red wire from esc plug and fired it up, well servos are(were) acting all weird,locking, twitching and other scary movements,,removed external BEC,,hooked internal BEC wire up smooth as silk again, so much for that idea(3 mins later, doin something stupid, smoked my CC80). Anyway at this point i would rather stay away from external BEC'S, so would either choice above be good(4A and 5A internal bec's)? Thankyou in advance for any input given. :?
My Lepp's specs are:
Airtronics z94761 cyclic
Futaba 9650 tail
Hacker 30-10xl
JR 790 PCM
JR 9303
CC80 ESC(smoked)
Futaba GY401
Just Smoked my CC80(long story) was using internal BEC so i thought i would try external BEC, got a ultimate UBEC 6v output, installed as per instructions including removing red wire from esc plug and fired it up, well servos are(were) acting all weird,locking, twitching and other scary movements,,removed external BEC,,hooked internal BEC wire up smooth as silk again, so much for that idea(3 mins later, doin something stupid, smoked my CC80). Anyway at this point i would rather stay away from external BEC'S, so would either choice above be good(4A and 5A internal bec's)? Thankyou in advance for any input given. :?
My Lepp's specs are:
Airtronics z94761 cyclic
Futaba 9650 tail
Hacker 30-10xl
JR 790 PCM
JR 9303
CC80 ESC(smoked)
Futaba GY401