Raptor 30 V1 airframe

[dg512055]

Head came off my old R30 V1 when jesus bolt broke. Motor, gyro and radio gear is OK. I need an old ariframe that someone has retired for parts.

[ddierking]

I have a R30 frame that was converted to a 50. What are you needing off of it?

[dg512055]

I need a main frame, landing gear, tail rotor case and 18 other assorted parts. It was bad.

[ddierking]

Both sides of the actual frames have damage, but everything else on the frame is ok. I can take pictures if you are interested. The boom has a dent in it as well, but I have a brand new mavrikk boom in the package. If anyone is interested in this let me know.

[Meneer]

I have a R30 frame that was converted to a 50. What are you needing off of it?

Hey Dan, this is Dan.

Do you still have the motor mount? Just tried to mount my new 50 Hyper to my stretched R30 V1 and only then remembered that the motor mount needs to be changed too :arggg:

Thanks
Dan

[ddierking]

I sold the raptor frame, but I have a brand new motor mount from gohbee, http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=30112&Category_Code=1370

without the screws. When I took the engine out of the raptor to put in the gohbee stinger, I just used the motor mount from the raptor. I'm not sure how much it would cost to send to Canada. Let me know if you are interested.

[Meneer]

Do you know for sure that the Gohbee mount will fit in the R30-V1 frames? I know the V2 tank won't fit because it's too wide, are the motor mount flanges on the frame wider on the V2 also?

Thanks
Dan

[Meneer]

Hi Dan,

I looked into it today. The Gohbee 50 mount looks to be a direct fit, and shipping via regular USPS will only be a few dollars in a padded envelope.

Can you ship right away? I'll Paypal you some dollars. I have the bolts to fit if they're M3 like everything else.

Thanks
Dan

Sorry for hijacking your thread dg512055

[FreakNastyAerobatics]

Head came off my old R30 V1 when jesus bolt broke. Motor, gyro and radio gear is OK. I need an old ariframe that someone has retired for parts.

I converted my Raptor V1 to a V2 so I have all the V1 parts from the conversion if your interested. It's a whole bag of stuff. Frame, swash plate, tank, clutch, a complete head with all the shafts, blade holders, washout a couple extra new spindles and a bunch of screws and stuff. I'll send you the whole thing for 10 bucks plus shipping... I just hate to throw the stuff away but it isn't doing me any good sitting here.......

[Meneer]

Sounds great, let's call that a deal.
Just regular USPS shipping will be fine, UPS charges a brutal customs brokerage fee.

I'll PM you my address, let me know what shipping will cost and I'll send you the dollars.

Regards
Dan