...

[Heli_harry]

..

[Heli_harry]

:?:

[Heli_harry]

:?:

[Rebuild]

Bravo! That's a pretty neat dual mount you've got there, harry. I would give one a try but I already have duals on the tail of my helis. It looks really light too! How much does the one with the fin weigh? :D

[Heli_harry]

:?:

[rcboosted]

Nice mount. I made my own by glueing 2 stockers together. Here's a related tip, if you want some extra tail authority almost for free, stack another tail rotor on top of the existing one. It will end up looking like a airplane prop making an X. The extra load is shared on both motors, so they won't get burnt out easily. Give it a try it works!

[Heli_harry]

:?:

[flydave]

How do you correct the C.G. as you can't move the battery far enough ?

[Heli_harry]

:?:

[woodknack]

I too used my cnc machine to make a dual tail motor fin. I just finished it up and will be putting on ebay soon. I want something that was affordable and good looking. So here it is.

[Heli_harry]

:?:

[woodknack]

Heli-harry

Im sorry you feel like Im raining on your parade but I hardly think that we are going to make a living selling dual tail motor fins! Also My fin is not the same as yours. Sure it holds 2 motors but the design is different!

So what If I put it in this post that YOU started. Do you feel you copyrighted this post to. :lol:

Im up for anything that will help out my fellow heli members.

[Heli_harry]

:?:

[woodknack]

? :roll:

[Rick Rotorhead]

Guys, both fin/mounts look great. I've all but given up with my Twister=Blade clone thing - so I won't get a fin/mount, BUT had i been persevering with the twitchy little devil and blinging it up. I would def have bought or made a duel mount. I already had a tail motor burn out, I solved it by 1) fitting a heatsink 2) cutting down the tail rotor by 1/2 inch.

Anyhow, nice machining both of you, you'll know duel motors have been around a while, but not with an integral fin. :noteworthy

[rcboosted]

I don't see how woodknack's fin is any different. Aside from the cosmetic changes, it's the same concept. The dual tail mount on helidirect IS different than Heli harry's.

[woodknack]

Yup it is a design change or as you say a cosmetic change.

If everybody had a red car the world would be boring..

[rcboosted]

What I'm trying to say it's a copy of Heli_harry's design. The dual tail set up isn't new, it's how it is implemented. You can have 2 tail booms with 1 tail motor holder each, you can have 1 boom with 2 tail motor holder, you can have an extension to the original holder (Heli_harry's design), or you can stack 2 stock holders together. (my personal DIY)

[woodknack]

The fin design is different then harry's. I did'nt copy harry's design! As far as where the motors go in the fin, there are not very many places to put the motors to make them work right.

Like I said who made the first dual tail motor design??? I don't hear anybody complaining about having different designs to buy. Instead of being stuck with just one.

[rcboosted]

At the time I informed you that the design was (and still is) copyrighted.

I was just expressing my opinion. This is between you and him, I'm butting out.

[woodknack]

Sorry I snapped.

[Heli_harry]

:?:

[Heli_harry]

:?:

[woodknack]

So Harry,

we'll let the people decide. See you on ebay..

[Heli_harry]

:?: