View Full Version : Can i use the tail drive gear from the R90?
Makis
11-18-2006, 10:43 AM
Hy...
My Secondary Tail Drive Gear is stripd out and my Szinger is falling down...
WTF. :arggg: :bomb:
The Stinger tail drive gear is from very low quality! can a bye some where a aluminium tail drive gear? at the gohbee site i canīt find something...
or can i use the tail drive gear from the Raptor 90?
Thx...
scottc
11-19-2006, 08:27 AM
Markis
are talking about the 9 tooth tail pully gear that is on the rear of the tail boom, the raptor 90 is going to be different and i dont think it will work being that the raptors are shaft driven tail units, you should be able to buy a up grade metal gear for a raptor 50 and that should work on the tail of the stinger 90
scottc
11-19-2006, 08:35 AM
http://www.ewtech.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=hhi&Product_Code=RAP236&Category_Code=Upgrades_for_RAPTOR
Markis look here for a upgrade pully if that is what you are talking about. scott
Makis
11-19-2006, 11:09 AM
No, i talk about the 18 tooth tail!!!!
scottc
11-19-2006, 12:16 PM
Markis what part number is it. scott
Makis
11-19-2006, 01:06 PM
http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=10241&Category_Code=1450
scottc
11-19-2006, 05:09 PM
Markis i am not sure if the raptor gear would work because it is shaft drven tail, sorry i cant help out. scott
Makis
11-24-2006, 12:58 AM
Hy scott....
you can not use the R90 tail......the R90 tail gear has 20 tooths......the Stinger has 18 tooths...
f....!
i want to make a tail from Aluminium....
which Modul has the tail gear ?? 1,5 or 2....or2,5....lol???
David or Scott....do you have a idea??
Greatings...
Makis
11-24-2006, 01:13 AM
Hello,
so i can bye here in Germany some gears from steel or from delrin....
which can i take in???? delrin is better than it is lighter than steel....
flyinfool
11-26-2006, 10:57 PM
As was mentioned the raptor gear will not work.
The gear is a 1.0 Module.
Is the gear that you are having a problem with aluminum or plastic?
Makis
11-27-2006, 11:31 AM
plastic.... it was the original one from gohbee it strips COMPLETE out on my Tic Toc.........it is a really bad quality and i didnt want to use it again! i work in a corp. and i can see with cameras the plastic....and it is definitly low quality....
i have byed now tails from DELRIN....they work fine and they doesnt break now when i make TIC TOCs....or rainbows....!
Greatings....