FALOPZ
11-18-2006, 11:29 AM
hi: im in swh1 for trex, all servos move ok, but when moving stivk i get one wrong,,,i dont see the swash menu to change from -50% to +50% i just can do that if i go to swash afr in another swash type, but if i stay in swh1 i cant do that,,,,how i go to swash menu in swh1? if is not possible what i have to do?
z11355
11-18-2006, 12:07 PM
SWH1 is for NON-CCPM Trex450 like the stock HDE
if you have a CCPM Trex (aftermarket frame or Align CDE), then you must use
the SR3 type swash.
if you have a non-CCPM machine, then reverse the servo in the 9C
FALOPZ
11-18-2006, 12:10 PM
those manuals.....manual beggins saying most helys are swh1.......so i thought that was my case,,,,and yes ive noticed that in sr3 i could see the swash menu but no int swh1,,,,all clear now,,,must change to sr3,,,,,thanks......i have new 450 se......