G3.5 with futaba t9chp

[markg]

i have g3.5 and futaba t9chp, and am having trouble setting it up for use with helis

the interlink controller works fine, with the throttle/collective working the way its supposed to i guess.

but when i plug in my radio, it doesnt work so well.

it sees my radio fine (the green light comes on, and i do have some semblance of control)

i have set it up as a heli, swh1, which should be correct since each channel does one thing (aileron/elevator/throttle/rudder), but there doesnt seem to be a collective input on the channel mapping chart, so i just cant get it to work right.

perhaps you have to use the throttle with collective, and not use them independently which is more real world?

any suggestions?

thanks,

mark

[MarkD]

You have to edit the heli model in G3.5 and tell it to use Pass Thru instead of Software Radio if not done already

[markg]

You have to edit the heli model in G3.5 and tell it to use Pass Thru instead of Software Radio if not done already

thanks! that did it

[vitek]

You could just have mapped 'Channel 6 - Knob' to the collective channel on your transmitter [channel 6]. The default channel mapping is set correctly for the 9C. All you should have had to do was connect your transmitter and assign SWE to channel 8.

[BarracudaHockey]

FWIW I prefer the interlink to the wear and tear on the gimbles and switches on my 9C that it would get from hours of sim use.